Page 12 - ifu

Laboratory - model making can be designed and used accordingly in the dental technology la-
boratory. At least four implants are required for immediate load- bar system
The technician again checks the exact fit of the respective impres- ing.
sion body in the impression material before selecting the appro- Three versions are available for the laboratory production of bar
constructions. The gold bar cylinder (18) is used by the dental tech-
priate laboratory analogue (8 | 9) and fastening it to the impres- MeoLock®
sion post (5 | 7) with the laboratory screw (50). After the applica- nician for casting. The plastic bar cylinder (19) is embedded to-
tion of a gingiva mask made of hardening rubber and the actual Denture prosthesis is secured against vertical pull-off forces by the gether with the modeled bar construction and cast in metal. This
model production with plaster of paris, the intended abutments MeoLock® abutment system . One-piece and two-piece MeoLock® plastic cylinder can be burned out. Another bar cylinder is made of
can be further processed. abutments (21 + 22) are available in heights of 1-6 mm. After ex- titanium (20) and can be fixed with a laser in the laboratory. The
posure, the one-piece MeoLock® abutment (21) is screwed onto selected bar abutments are fixed on the model with the laboratory
the implants (1 |1.1) with the MeoLock® insertion tool with 30 screw (50) and can now be processed. After completion of the bar
Laboratory – abutment selection and processing
Ncm. The two-part MeoLock® abutment (22) is screwed onto the construction, it is fastened in the mouth with the final connecting
implant (1 |1.1) with the connecting screw (51) with 30 Ncm and screw (51) with 30Ncm.
Depending on your wishes or the axis of the placed implant, abut- provided with an impression cap (23) for the impression. After the
ments (10 - 16 | 18 - 22 | 27 | 33 | 34 | 46 | 48 | 49) can be selected impression has been taken, the dental technician places the Me-
and individualized from the selection offered. Standard abutments oLock® model analog (24) in the impression cap (23) remaining in CLEANING AND STERILIZING INSTRUCTIONS
(10 | 12) are sufficient if the implant is aligned correctly. For minor the impression and fabricates the master model. The cover den- All Meoplant implants are delivered sterile and are intended for
corrections, the one-piece structure (13) can be adjusted to the ture prosthesis is now constructed over the MeoLock® attachment single use only before the stated expiry date.
tooth axes by grinding in the mouth using a rubber dam. The uni- (21 | 22). The MeoLock® matrix (25) can be polymerized both in
versal abutments (15 | 16) can be individualized in the laboratory. the mouth and on the model . The colors of the retention elements Warning: The components that are delivered sterile must no
(26) (patrix) symbolize the different pull-off forces. If the retention longer be used if the packaging is damaged or has been previously
open healing opened.
elements are worn , they can be replaced.
INFORMATION ON MRI SAFETY
suitable healing caps made of titanium (3) with 2-4 Ncm or custom- ball head attachments
izable healing caps made of Peek (4) with 15 Ncm can be screwed In the case of magnetic resonance examinations, it should be
onto the connecting screw (5) with open healing, depending on the Ball head abutments (27) with the Insertion instrument (62) with noted that the Meoplant implant system has not been tested for
thickness of the gingiva, in order to close the peri-implant soft tis- 30 Ncm and with the MeoMini® implant (47) with 25 Ncm. A ball safety and compatibility in MRI examinations.
sue to form and mature. Impression as described under a) and b). head model analogue (28) is available for model production. For
the impression, the ball head abutments (46) for MeoMini® (47) HANDLING AND STORAGE
and the ball head abutments (27) for MeoClassic (1) and MeoTulip
(1.1) are screwed on and conventionally molded. After removing The implants are gamma sterilized in the packaged condition and
Open healing with abutments and long-term temporary the impression tray, the ball head analogue (28) is inserted into the are intended for single use. There must be no resterilization. The
resulting cavity and the master model is made in the laboratory. implants may no longer be used if the packaging is damaged or
If the soft tissue maturation is to proceed as undisturbed as possi-
ble, frequent changing of structural parts is contraindicated. Here With both types of implants , the dental technician has the option opened and if the expiry date has expired. The manufacturer de-
it makes sense to insert the abutments in the same way as the later of individually fitting the two existing ball head abutments (27 | clines all responsibility in the event of non-compliance. All instru-
dentures. Depending on the fit of the implant, straight abutments 46) with two different retention abutments. Firstly, the rubber O- ments and abutments/secondary parts are packaged non-sterile
(10 | 11 | 13 - 16) can be used, which can be individually adjusted ring (30) and the associated O-ring mount (29) as a matrix that is and must be sterilized before each use (can be found at: https://re-
to the tissue conditions by grinding . polymerized into the prosthesis and secondly, the Preci - Clix male processing.meoplant.de/ and as a paper version with the delivered
(29) with the associated Preci - Clix matrix ( 31) which is also pol- product). For all items intended for single use, it was not tested
Open healing with abutments and prefabricated dentures for im- ymerized into the prosthesis . whether repeated cleaning procedures and sterilization processes
mediate loading have an effect on the function and fitting accuracy of the material.
MeoMini® bodies Therefore, multiple use of this item is strongly discouraged. The
The only difference from the previous paragraph is the supply. As product must be stored in a dry place in its original packaging, at
part of CAD/CAM planning, the dental technician can then digitally The one-piece MeoMini® compact abutment (48) is screwed onto room temperature and away from direct sunlight. Improper stor-
scan the dentures using scan abutments (17 | 43), which are the MeoMini® implant (47) in the mouth with the insertion instru- age can affect product properties and lead to supply failure.
screwed onto the implant that has just been placed in the mouth. ment (60 | 61) with 25 Ncm and then molded. The two-part
With the resulting data set, the crown, bridge or bar restoration MeoMini abutment (49) is fixed to the MeoMini® implant (47) with
the connecting screw (53) with 25Ncm and then molded.

Seite 12 von 89